An advanced technology, premium quality, waterborne acrylic semi-gloss enamel for interior or exterior use on properly prepared wood, metal, or masonry surfaces. Bonds to clean glossy, hard surfaces such as aged oil base or alkyd enamels without sanding. This all purpose, non-yellowing finish is ideal for use on walls, equipment, machinery, piping, structural steel, storage tanks, railings, wood or metal trim, shutters, building exteriors, pre-finished siding, furniture and metal fences.

Use on windows, doors an shelving without sticking. Features alkyd-like hardness and durability exceptional adhesion, superior flow and leveling, fast dry, easy application excellent gloss and color retention, low odor, high hiding and excellent resistance to washing, grease, oil and water. Low VOC.

• Alkyd-like hardness and durability
• Excellent gloss and color retention
• Low odor and water clean-up
• Good flow and leveling
• High hiding
• Non-yellowing
• Washable
• Rapid dry - minimum downtime in plant operations

• Abrasion resistant
• Bonds to clean glossy surfaces without sanding
• Easy application - brush, roll or spray
• All purpose finish for multiple surfaces
• Highly flexible - resists peeling and chipping
• Resistance to grease, oil and water
• Low VOC

• Advanced Technology Acrylic Resin
• Pigmentation varies with color
• Not formulated with lead or mercury containing materials

Color: White, ready-mix and custom colors
Finish: Semi-Gloss (50 units @ 60°)
Clean-up Solvent: Soap and water
Density: 10.4 lbs./gal. (1.25 kg/L) - varies with color
Recommended Film Thickness: 1.5-2.0 mils dry -
3.5-5.0 mils wet
Service Temperature Limits: 200°F (93°C) in air
VOC: 1.59 lbs./gal. (190 g/L) - varies with color
Solids: Volume - 42% + 2% - varies with color

Practical Coverage: Apply at 330-430 sq. ft. per
gallon (8-11 m²/L) or 3.5-5.0 mils wet
(1.5-2.0 mils dry) depending on surface
texture and porosity.
Flash Point: Non-flammable
Dry Time @ 770F (250C) & 50% RH:
To touch - 1 hour
To recoat - 2 hours
Shelf Life: Over 1 year

PROPERTY
Adhesion
Hardness
Flexibility
Direct Impact Resistance
Abrasion Resistance
Stain Resistance
(coffee, grape juice, mustard, lipstick, food coloring)
Block Resistance

TEST METHOD
ASTM D3359, Method A
ASTM D3363, Pencil
ASTM Dl 737, 180~ bend, 1/8" mandrel
ASTM D4585, Gardner Impact Tester
ASTM D4060, Tabor CS17, 1000g load
ASTM D1308, washed with soap and water after 24 hours contact

ASTM D2793, 2 kg/in² @ 120°F

RESULTS
Excellent: 5A, No peeling or removal
Very Good: B
Excellent: No cracking or flaking
Very Good: 100 in-lbs
Good: 260mg loss/ 1000 cycles
Excellent: No effect


Excellent: No sticking